Oxygen Concentrator OXIPURE-5

Description

Oxygen Concentrator OXIPURE-5

• The maximum recommended flow: Slimin
• The flow range of nominal pressure of 7 k Pa: 0.5 51/min
• The flow rate change under the maximum recommended flow rate with the back pressure of 7 k Pa: <0.5 limin
• Oxygen concentration when the nominal pressure of the outlet is zero (the specified concentration level is reached within 30 min after the initial start.up): The oxygen concentration 1893%g 3% at the Oxygen flow rate of 11/m in
• The output pressure: 20.50 k Pa
• Release pressure of compressor safety valve: 250kliti ISOk Pa
• Altitude: The oxygen concentration does not reduce at 1828 meters above sea level, and the efficiency Isles’ than 90% from Mamie% to 4000 meters.
• Security system: Current overload or loose connection line, machine halt; Power off, alarm and machine halt; 1=1
• Minimum working time no less than 30 minutes;
• Electrical classification: Class II equipment, Type B application part; Character of service: Continuous operation
• Normal working environment: Ambient temperature range: IODegree C , 40 Degree C; Relative humidity < 80 %: Atmospheric pressure range : 860 h Pa – 1060 h Pa; Note The equipment should be placed In normal working environment for more than four hours before use when the storage temperature Is lower than VC.
• Temperature of oxygen outlet <46’C;
• Recommendation: The length of the oxyden tube should not exceed 15.2 meters and cannot be folded;
• Ingress protection rating: IPXO
• Device type Non-AP/APO device (cannot be used in the presence of flammable anesthetic gas mixed with air or flammable anesthetic gas III mixed with oxygen or methylene).